- Model NO.: SWS
- Application: Heater, Cooler
- Style: Plate Type
- Materials: 304, 316, Smo-254, 310S,2205
- Trademark: SeHenStar
- Origin: China
- Certification: CE, ISO
- Principle: Mixing Heat Exchanger
- Material: Stainless Steel
- Heat Transfer Surface: Plate Heat Exchanger
- Specification: WasterWater heater, WasterWater cooler
- HS Code: 8419500010
SWS heat exchanger is used in heat transfer process of wastewater or other impurity fluid,It consists of concentric thermo plates that are continuously cleaned with attached brushes.The continuous cleaning of the plates ensures optimum effect from the heat exchanger, as the dirt is kept at a minimum. The brushes make sure that particles do not burn onto the thermo plates which also has a positive effect on the life of the product.
SWS heat exchanger is built as a vessel and thus allows for heat exchange in situations, where the process fluid flows in an uneven steam or even stops for shorter or longer intervals.
Self-cleaning unit with brushes with an adjustable speed of rotation
Highly efficient due to the movement of the brushes, which create better turbulence and thus increased efficiency
Easy to inspect
Available in various steel qualities
Variable volume of vessel and number of rings depending on the application
Heat recovery in connection with swimming pools and the like.
Cooling of vaste water or sluge.
Discharge air from paper machines.
Chemical high-viscosity fluid heat transfer.
And other fluids with heavy fibre content.
One Paper factory porduction process requires a very large volume of water drawn from a river,In winter,the incoming water is relatively cold,arriving at a temperature of approx.5ºC.On the other hand,the factory production process wastewater temprature is up to 55ºC,which is much too high for the biological wastewater treatment to follow. The microorganisms die if the water is too hot. In such cases,it's the best Energy-saving solutions of using wasterwater to heat incoming water while reducing emissions to below 30 degrees.
Final SWS heat exchanger performance:
Heat output: 1 MW
Flow rate(wastewater side) 65 m3/h
Flow rate(cooling water side) 55 m3/h
Pressure loss(wastewater side) 0.01 bar
Pressure loss(cooling water side) 0.40 bar
|Style||Our Heat Exchanger||Shell and tube |
|Operation temperature range||<800ºC||<800ºC||<170ºC||<350ºC|
|Max. pressure||<60 bar||<200 bar||<32 bar||<25 bar|
|Heat transfer coefficient of |
|Application of air and water |
|Applicable||Applicable||Not applicable||Partial applicable|
|Immersion in tank or water||Applicable||Partial applicable||Not applicable||Not applicable|
|Welded to tank and reactor||Applicable||Not applicable||Not applicable||Not applicable|
|Install into existing reaction tower and |
|Flexible||Partial applicable||Not applicable||Not applicable|
|All welded structure||Applicable||Applicable||Not applicable||Not applicable|
|Heavy contaminated liquids and other |
|Unit area weight||Low||High||Low||High|
|Falling film, condenser and evaporator||Applicable||Applicable||Partial applicable||Partial applicable|