Gold Member Since 2016
Audited Supplier

Suzhou Sehenstar Energy Technology Co., Ltd.

Heat Exchanger, Plate Heat Exchanger, Flue Gas Heat Exchanger manufacturer / supplier in China, offering Pillow Plate Jacket Tank Condenser Heat Exchanger for Beverage Processing, Pillow Plate Condenser Energy Saving and Environment Protection Heat Exchanger, Embossed Design Stainless Cold Plate Heat Exchanger Jacket Tank and so on.

(/ )

Supplier Homepage Company Show Certificates Welded plate heat exchanger


Welded plate heat exchanger [May 21,2016]
Welded plate heat exchanger

These Pillow Plate  heat exchangers transfer heat from a thin film of liquid falling on the outside of the plates. The refrigerant is passing through the inside of the plates. Cooling of liquids over a wide temperature difference can easily be achieved. Capacity range: 10 kW up to 2500 kW.

Plate Structure:


Falling Film Chillers are very suitable for cooling large amounts of water down to temperatures as low as 0,5ºC without risk of chiller damage from ice. 

Falling Film Chillers can handle all kinds of liquids; from clean water to contaminated liquids with solids. Even moderately viscous solutions can be chilled economically. Falling Film Chillers can easily be cleaned, thanks to accessibility from all sides and space between the evaporator plates. Falling Film Chillers are suitable for R717, CO2, glycol and all other Freon refrigerants.

The chillers cool a thin layer of liquid flowing over both sides of the pillow shaped plates. The refrigerant is contained inside the plates.


•             Fresh produce.

•             Poultry processing.

•             Bakery.

•             Food and dairy processing.

•             Seafood processing.

•             Red meat.

•             General food industry.

•             Beverages.

•             Concrete cooling.


•             Capacity 10 - 2500 kW/unit (for water).

•             Cooling of liquids over a wide temperature range

                ΔT 30 ºC to 0,5 ºC is possible (by recirculation).

•             Heat transfer coefficients up to 1200 W*K/m2

•             Large capacity of up to 600 m3/unit.

•             Suitable for use with R717, CO2, glycol and HFC refrigerants.

•             Can be made of most types of stainless steel.


Frames are available in designs to meet your specific chilling requirements. All frames are custom-made, this means dimensions can be changed according to your specifications. 

Water tanks are available for storage and/or recirculation of water and are available in several designs. The tanks are made out of stainless steel with 50-80 mm of polyurethane insulation. 

Standard units are constructed of type 304-L stainless steel with a 2B finish. All welds are pickled/passivated or blasted with glass beads. Optional materials are available upon request, including 316-L and SMO-254 as well as others. Optional finishes include electro-polish for ultra-high purity or corrosion applications.