Catalyst Cooler, All-Welded Type 304 Stainless Steel Plate Heat Exchanger
|FOB Price:||US $3,000-5,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $3,000-5,000/ Piece|
- Model NO.: SV
- Application: Heater, Cooler
- Style: Plate Type
- Materials: 304, 316, Smo-254, 310S,2205
- Trademark: SeHenStar
- Origin: China
- Certification: CE, ISO
- Principle: Mixing Heat Exchanger
- Material: Stainless Steel
- Heat Transfer Surface: Plate Heat Exchanger
- Specification: Solid heater, Solid cooler
- HS Code: 8419500010
The plate type Bulk Solids Heat Exchanger is conceptually a very simple piece of equipment. It consists of an inlet hopper, one or more plate banks in parallel and a mass flow device. The product enters in the top, forms a cone above the plates and flows between the equal flow channels in gravity flow. The cooleroperates with the product level always maintained above the plate banks. So it operates always full of product. The mass flow device creates equal movement of bulk solids over the whole cross-section of the cooler. Cooling water flows through the plates. A relatively simple level control at the top (not in our scope) generates a 4- 20 mAmp signal to control the mass flow device at the bottom in such a way that what comes in at the top leaves at the bottom within maximum and minimum inlet hopper level set points.
A.Uses Up To 90% Less Energy.
The SV bulk solids heat exchanger is ultra-efficient, using up to 90% less energy than other technologies. The indirect plate cooling design does not require the use of air in the cooling process, which eliminates both the need for large horsepower electric drives and the associated heat losses.